IoT

One of the new challenges arising with the use of edge, fog, and cloud architectures is the connection of components to each other and to the public cloud. An important element of developing a solution capturing all pieces is the IoT framework susietec

At the field, or edge level, data is collected by industrial computers, e.g. by gateways, which process, filter, analyze and act on these data in real-time right at the device.

Edge, fog and cloud applications demand increasing computing power. The interfaces to sensors or machines often require non-standard solutions. Especially in smaller machines, space is limited or restricted in some dimension and need a special solution.

Today, the connection from the sensor device to the embedded cloud takes place via real-time data communication, on sensor and edge level - for example Industrial Ethernet or fieldbuses - and gateways , which provide the transformation of real time data into the informational area.

资源

We provide our customers with additional material enhancing their knowledge. Find all White Papers, Use Cases and brochures here.

Learn more about how Kontron supports its customers by improving their products and solutions. Read our Use Cases. Contact us for further information.

Learn more about our solutions for various industries by downloading our Whitepapers.

We provide our customers with additional material enhancing their knowledge. Find all White Papers, Use Cases and brochures here.

Get extended insights into our products and solutions by participating in our webcasts. You can find all webcasts here. Contact us for further information.

19.12.2007

Kontron Introduces First nanoETXexpress Computer-On-Module for PCI Express-based Credit Card Sized Computing

nanoETXexpress-VX8 Impresses with Low-Power Mobile Computing Performance

SAN DIEGO/Nuremberg, Germany, November 28, 2007 Today, at the SPS/IPC/Drives in Nuremberg, Germany (Hall 7 / Booth 7-306), Kontron introduced the first nanoETXexpress computer-on-module to pack low power processing performance and high-end graphics capabilities as well as PCI Express and Serial ATA interfaces on a credit card footprint of merely 55 mm x 84 mm.

The Kontron nanoETXexpress-VX8 is the first member of a new scalable family of nanoETXexpress computer-on-modules. Future members will also include nanoETXexpress COMs based on processors and chipsets from other manufacturers. This new form factor standard initiated by Kontron is the logical addition to the existing PCI and/or ISA based computer-on-modules standards, X-board and DIMM-PC.

Designed according to the pin definitions of the COM Express specification, the new Kontron nanoETXexpress computer-on-modules are ideal for the emerging generation of mobile embedded applications that require low power performance and the latest interfaces on the smallest form factor. These include hand-held units for the medical sector, mobile data solutions and other emerging applications that have not been possible as of yet due to size restrictions.

This nanoETXexpress computer-on-module offers outstanding processor performance up to 1.5 GHz, a highly integrated chipset, up to 400 MHz FSB and up to 1GB DDR2 RAM. For applications requiring extra graphics performance, there is an integrated graphics processor for accelerated MPEG2 decoding and extremely clear images. Dual Channel 18/24 Bit LVDS provide LVDS resolutions.

In order to meet current and future interface requirements, the Kontron nanoETXexpress computer-on-module supports one Gigabit Ethernet interface, a PCI Express x1 lane as well as two Serial ATA II ports. The two SATA interfaces are designed in accordance with the PICMG COM.0 specification to ensure that the COMs connectors remain COM Express compatible. Since the Kontron nanoETXexpress computer-on-module follows the PICMG COM Express standard, it is 100 percent compatible with the COM.0 Type 1 connector. The locations of the identically mapped pin-outs are also 100 percent COM.0 compliant. Software support for Windows XP, XPe, CE, Linux and VxWorks rounds off the set of features.

About Kontron
Kontron designs and manufactures standard-based and custom embedded and communication solutions for OEMs, systems integrators, and application providers in a variety of markets. Kontron engineering and manufacturing facilities, located throughout Europe, North America, and Asia-Pacific, work together with streamlined global sales and support services to help customers reduce their time-to-market and gain a competitive advantage. Kontrons diverse product portfolio includes: Computer-on-Modules, SBCs/blades, open-modular platforms and systems, HMIs, and custom capabilities. Kontron is a Premier member of the Intel® Embedded and Communications Alliance and was awarded 2006 Intel Member of the Year. The company is a recent three-time VDC Platinum vendor for Embedded Computer Boards. Kontron is listed on the German TecDAX stock exchange under the symbol "KBC". For more information, please visit: www.kontron.com.

Reader contact Americas:
Kontron America Inc.
14118 Stowe Dr
Poway, CA 92064-7147
United States of America
Tel: (888)-294-4558
Fax: (858) 677-0898
sales@us.kontron.com
www.kontron.com

Editor contact Americas:
Richard Pugnier
Kontron America Inc.
14118 Stowe Dr
Poway, CA 92064-7147
United States of America
Tel: (858) 623-3006
Fax: (858) 677-0615
richard.pugnier@us.kontron.com

DIMM-PC®, PISA®, ETX®, ETXexpress® , microETXexpress, nanoETXexpress, X-board®, DIMM-IO® and DIMM-BUS® are trademarks or registered trademarks of Kontron Embedded Modules GmbH. Kontron is trademark or registered trademark of Kontron AG. All other brand or product names are trademarks or registered trademarks or copyrights by their respective owners and are recognized.

back all news